Round Spray
There are two styles for the full cone spray according to the liquid supply method: siphon/gravity supply and pressure supply. When the liquid is under no pressure, the siphon/gravity supply can be used; when the liquid comes from the pressure pump, the pressure supply can be selected. In addition, the liquid flow rate can be changed to adjust the height of the liquid container with respect to the atomizer, both on siphon and on gravity feed.
JA Siphon Round Air Atomizing Nozzle
Full cone air atomizing nozzles are desirable for applications requiring a relatively narrow, long-reaching, circular pattern and are especially suited to gas cooling, gas conditioning and humidifying.
- Material:
- PVC, PVDF, PTFE, brass, stainless steel
- Conn. thread:
- 1/8, 1/4, 3/8 or 1/2 female BSPP/NPS
- Liquid supply:
- siphon or gravity feed
- Air supply:
- Air compressor or pump
- Fluid mixing:
- Internal mixing
- Air pressure:
- 0.7 to 5 bar
- Spray angle:
- 17° to 22°
JB Siphon Round Air Atomizing Nozzle
Full cone air atomizing nozzles are desirable for applications requiring a relatively narrow, long-reaching, circular pattern and are especially suited to gas cooling, gas conditioning and humidifying.
- Material:
- PVC, PVDF, PTFE, brass, stainless steel
- Conn. thread:
- 1/8, 1/4, 3/8 or 1/2 female BSPP/NPS
- Liquid supply:
- siphon or gravity feed
- Air supply:
- Air compressor or pump
- Fluid mixing:
- Internal mixing
- Air pressure:
- 0.7 to 5 bar
- Spray angle:
- 17° to 22°
JC Siphon Round Air Atomizing Nozzle
Full cone air atomizing nozzles are desirable for applications requiring a relatively narrow, long-reaching, circular pattern and are especially suited to gas cooling, gas conditioning and humidifying.
- Material:
- PVC, PVDF, PTFE, brass, stainless steel
- Conn. thread:
- 1/8, 1/4, 3/8 or 1/2 female BSPP/NPS
- Liquid supply:
- siphon or gravity feed
- Air supply:
- Air compressor or pump
- Fluid mixing:
- Internal mixing
- Air pressure:
- 0.7 to 5 bar
- Spray angle:
- 17° to 22°
JA Pressure Round Air Atomizing Nozzle
The round air cap produces a narrow angle round spray pattern. The liquid is pressure fed and internally mixed. Droplet sizes and flow rates are larger than the other two liquid supply modes, depending on the liquid to air consumption ratio.
- Material:
- PVC, PVDF, PTFE, PEEK, brass, stainless steel
- Conn. thread:
- 1/8, 1/4, 3/8 or 1/2 female BSPP/NPS
- Liquid supply:
- pressure feed
- Air supply:
- air compressor or pump
- Fluid mixing:
- internal mixing
- Air pressure:
- 0.7 to 5 bar
- Spray angle:
- 13°~22°
JB Pressure Round Air Atomizing Nozzle
The round air cap produces a narrow angle round spray pattern. The liquid is pressure fed and internally mixed. Droplet sizes and flow rates are larger than the other two liquid supply modes, depending on the liquid to air consumption ratio.
- Material:
- PVC, PVDF, PTFE, PEEK, brass, stainless steel
- Conn. thread:
- 1/8, 1/4, 3/8 or 1/2 female BSPP/NPS
- Liquid supply:
- pressure feed
- Air supply:
- air compressor or pump
- Fluid mixing:
- internal mixing
- Air pressure:
- 0.7 to 5 bar
- Spray angle:
- 13°~22°
JC Pressure Round Air Atomizing Nozzle
The round air cap produces a narrow angle round spray pattern. The liquid is pressure fed and internally mixed. Droplet sizes and flow rates are larger than the other two liquid supply modes, depending on the liquid to air consumption ratio.
- Material:
- PVC, PVDF, PTFE, PEEK, brass, stainless steel
- Conn. thread:
- 1/8, 1/4, 3/8 or 1/2 female BSPP/NPS
- Liquid supply:
- pressure feed
- Air supply:
- air compressor or pump
- Fluid mixing:
- internal mixing
- Air pressure:
- 0.7 to 5 bar
- Spray angle:
- 13°~22°