One-nozzle Off-set End

Characteristics:

This is a pipe end coupling with one push lock pipe connection. There is a nozzle threaded hole on the other side, the hole is angled 90° to the pipe connection inlet. This threaded hole can customize according to the user nozzle thread. This end fitting is available in three styles: no-hole, one-nozzle hole and two-nozzle hole.

This is a quick connect coupling that can be easily installed without any tool assistance. Compared other similar product, our 700 series fitting offers better sealing, longer life and resistance to higher pressures, thanks to a unique product design and high processing accuracy. And the fitting is equipped with an 8-talon lock ring, its unique structure and precise processing method, so that it has a very good performance: under a pressure of 70 bar/1000PSI, the tube is tightly fastened by the locking ring, and there is no shaking, so that this product has stronger tightness and applicability, even if the tolerance of pipe outer diameter is 0.2mm, this fitting still has good sealing.

It is required for the copper or stainless steel pipe to prefabricate a special slot at both ends of the tube in advance to fix this fitting. For the nylon or PE plastic pipe, there is no need to groove the tube, but it is best to cut the ends of the tube into a circular inclination, which can avoid the sharp burrs jamming the fitting and unable to insert.

Our 700 series push lock fittings, because of their unique internal structure and lock ring design, in the installation process, they do not need special hoisting, only need to fix the pipeline horizontally, which can help users save 50% installation time. They are widely used for cooling and humidification in greenhouse. Because of its convenient installation and long service life, it is very favored by customers from all over the world.

Construction:

• Unique 8-talon lock ring and double seals design
• The models listed are machined from bold bar stock
• Regular sizes are 3/8" or 10mm nylon or metal pipe
• Standard materials are Ni-brass, SS304 and SS316
• Nozzle threads are available in 10/24, 12/24, W3/16 or M5

Typical Applications:

• Paper mill, cigarette mill humidity control
• Humidification and cooling in the greenhouse
• Odor elimination and environmental protection
• Humidification of textile workshop and electronics industry
• Textile mill humidity control and eliminate static electricity