Standard Full Cone Nozzles
Standard full cone nozzles produce axial-flow solid cone spray areas: round, oval or square. So these nozzles contain round full cone nozzle, oval full cone nozzle, and square full cone nozzle based on their spray angle between 40° and 100°. Standard full cone nozzle has a medium impact force.
BA Cutty Full Cone Nozzle
Model BA is a short head design with a parallel pipe thread. It is more suitable for tight headroom. Multi-grooved vane design produces a uniform spray effect and standard spray angle.
- Model:
- BA series
- Construction:
- two-piece, with a spiral groove vane
- Material:
- Brass, Stainless steel
- Thread:
- 1/8 to 3/8 male BSPP/NPS
- Pressure:
- 0.7 to 10 bar
- Spray angle:
- 58° to 90° at 1.5 bar
- Flow rate:
- 0.6 to 13.6 LPM at 2 bar
BB Full Cone Nozzle
Model BB is the most commonly used full cone nozzle. It has a built-in X-style vane, which can better reduce clogging. If you want fast delivery, BB nozzle is the best choice.
- Model:
- BB series
- Construction:
- Two-piece, with an X-style vane
- Material:
- Brass, stainless steel
- Thread:
- 1/8 to 3/8 male BSPT/NPT
- Pressure:
- 0.7 to 10 bar
- Spray angle:
- 58° to 90° at 1.5 bar
- Flow rate:
- 0.6 to 13.6 LPM at 2 bar
BC Full Cone Nozzle
Model BC is a flat square design. It is different appearance from model BB, and both models have the same internal structure and spray features. But its smallest thread size is required at 3/8" .
- Model:
- BC series
- Construction:
- One-piece body with an X-style vane
- Material:
- Brass, Stainless steel
- Connection:
- 3/8 to 1 inch male thread
- Pressure:
- 0.5 to 10 bar
- Spray angle:
- 50° to 94° at 1.5 bar
- Flow rate:
- 5.1 to 76.5 LPM at 1.5 bar
BE Full Cone Nozzle
Model BE is a combined full cone nozzle, which consists of a removable cap and a connection body. It is available in a variety of flow rate and thread size options. Their advantages are revealed in environments based on small flow and large thread.
- Model:
- BE series
- Construction:
- Two-piece with an X-style vane
- Material:
- Brass, Stainless steel
- Thread:
- 1/8 to 1/2 male BSPT/NPT
- Pressure:
- 0.5 to 10 bar
- Spray angle:
- 50° to 94° at 2 bar
- Flow rate:
- 0.6 to 31 LPM at 2 bar
BK Square Full Cone Nozzle
The model BK produces a square spray area. Please note that the position of square spray pattern, as it contacts the sprayed surface, will rotate as the pressure increases. This is more pronounced with larger size nozzles and at lower pressures.
- Model:
- BK series
- Construction:
- One-piece body with an X-style vane
- Material:
- Brass, Stainless steel
- Thread:
- 1/8 to 2-1/2 male BSPT/NPT
- Pressure:
- 0.5 to 10 bar
- Spray angle:
- 52° to 84° at 2 bar
- Flow rate:
- 2.2 to 585 LPM at 2 bar