Wide-angle Full Cone Nozzles
BA-W Wide Full Cone Nozzle
Model BA-W is a short head design with a parallel pipe thread. It is more suitable for tight headroom as same as model BA. Multi-grooved vane design produces a uniform spray effect and standard spray angle.
- Model:
- BA-W series
- Construction:
- One-piece with a spiral groove vane
- Material:
- brass or stainless steel
- Thread:
- 1/8 to 3/8 male BSPP/NPS
- Pressure:
- 0.7 t o 10 bar
- Spray angle:
- 120° at 1.5 bar
- Flow rate:
- 0.9 to 16 LPM at 2 bar
BB-W Wide-angle Full Cone Nozzle
Model BB-W is a common wide-spray full cone nozzle. It has a built-in X-style vane, which can better reduce clogging. If you want a wide angle and small flow full cone nozzle, the BB-W style is the best choice.
- Model:
- BD series
- Construction:
- One-piece hex body with an X-style vane
- Material:
- Brass, Stainless steel
- Thread:
- 1/8 to 1/2 male BSPT/NPT
- Pressure:
- 0.5 to 10 bar
- Spray angle:
- 120° at 1.5 bar
- Flow rate:
- 0.8 to 27 LPM at 1.5 bar
BC-W Wide-angle Full Cone Nozzle
Model BC-W body is a flat square design. It is different appearance from model BC, and both models have the same internal structure and spray features, only the BC-W has much bigger spray angle.
- Model:
- BC-W series
- Construction:
- One-piece round body with an X-style vane
- Material:
- Brass, Stainless steel
- Thread:
- 3/8 to 1-1/2 male BSPT/NPT
- Pressure:
- 0.5 to 10 bar
- Spray angle:
- 120° at 1.5 bar
- Flow rate:
- 9.3 to 150 LPM at 1.5 bar
BK-W Wide-angle Square Nozzle
Model BK-W produces a wide angle square spray pattern. Please note that the position of square spray pattern, as it contacts the sprayed surface, will rotate as the pressure increases. This is more pronounced with larger size nozzles and at lower pressure
- Model:
- BK-W series
- Construction:
- One-piece body with an X-style vane
- Material:
- Brass, Stainless steel
- Thread:
- 1/4 to 1 inch male BSPT/NPT
- Pressure:
- 0.5 to 10 bar
- Spray angle:
- 120° at 1.5 bar
- Flow rate:
- 8.5 to 78 LPM at 2 bar