Plastic Mixing Eductor Nozzles
Mini Plastic Tank Nozzle
The nozzles can pull in 2 gallons of surrounding solution for every 1 gallon pumped from nozzle input, so its circulation ratio of supply to discharge is 1:3, which enable smaller pumps to circulate large volumes of tank solution.
- Model:
- HA series
- Construction:
- One-piece body
- Material:
- PP(Polypropylene) plastic
- Thread:
- 1/4 male
- Pressure:
- 0.7 to 4 bar
- Max. jet length:
- 0.5 to 4 meters
Plastic Mixing Jet Nozzle
Mixing Jet Nozzles use a unique venturi design which enable smaller pumps to circulate large volumes of tank solution. General uses include lifting, pumping, mixing, and agitating of liquids as well as handling granular solids and slurries.
- Model:
- HB series
- Construction:
- Two-piece body
- Material:
- GFRP, PVDF plastic
- Thread:
- 1/4, 3/8, 1/2 and 3/4 inch
- Pressure:
- 0.7 to 4 bar
- Max. plume length:
- 0.9 to 10 meters
- Flow rate:
- 11.3 to 43 lpm
Liquid Mixing Eductor
The nozzles can pull in 4 gallons of surrounding solution for every 1 gallon pumped from nozzle input, so its circulation ratio of supply to discharge is 1:5, which enable smaller pumps to circulate large volumes of tank solution.
- Model:
- HC series
- Construction:
- Two-piece body
- Material:
- GFRP, PVDF plastic
- Thread:
- 3/4 inch
- Pressure:
- 0.7 to 4 bar
- Max. plume length:
- 10 meters
- Flow rate:
- 11.3 to 43 lpm
Threaded Adjustable-ball and Eductor
Threaded adjustable-ball seat simply screws into a threaded pipe and is available with a variety of spray tips. The swivel adjustable-ball allows 45°direction control for precise spray coverage. For sizes 1/4", 3/8" and 1/2" only.
- Color:
- black
- Construction:
- Multi-piece construction
- Material:
- GFRP/PVDF plastic
- Seat thread:
- 1/8, 1/4, 3/8 or 1/2 inch
- Pressure:
- 0.5 to 4 bar
- Eductor thread:
- 1/4, 3/8 or 1/2 inch
Clip Adjustable-ball and Eductor
Clip adjustable-ball seat simply clips on a pre-drilled pipe and is available with a variety of spray tips. The swivel adjustable-ball allows 45°direction control for precise spray coverage. For sizes 1/4", 3/8" and 1/2" only.
- Color:
- black
- Construction:
- Multi-piece construction
- Material:
- GFRP plastic
- Pipe size:
- 1, 1-1/4, 1-1/2 and 2 inch
- Pressure:
- 0.7 to 4 bar
- Drilling hole:
- 14 mm