Plastic Mixing Jet Nozzle
- Number:
- 93
- Brand:
- RELAB
- Model:
- HB series
- Construction:
- Two-piece body
- Material:
- GFRP, PVDF plastic
- Thread:
- 1/4, 3/8, 1/2 and 3/4 inch
- Pressure:
- 0.7 to 4 bar
- Max. plume length:
- 0.9 to 10 meters
- Flow rate:
- 11.3 to 43 lpm
Send a message to us!
Design Features
Characteristics:
Plastic Mixing Jet Nozzles (Eductors) are available in GFRP plastic (Glass-fiber Reinforced Polypropylene) and PVDF (Polyvinylidene Fluoride). The nozzles can pull in 4 gallons of surrounding solution for every 1 gallon pumped from nozzle input, so its circulation ratio of supply to discharge is 1:5.
Mixing Jet Nozzles are designed for "in-tank" applications. The Eductors operates on the principle of flow dynamics pressurized fluid is accelerated through the nozzle to become a high velocity stream that entrains tank contents and intimately mixes with them. This combined stream exits the eductors at a high velocity creating a flow field capable of causing additional agitation and mixing the tank contents.
The Mixing Jet Nozzles' motive fluid may come from two sources. The tank liquid may be re-circulated through the eductor via an external pump or a secondary fluid may be introduced into the tank. Gases, as well as liquids, are used as the secondary fluid. Aeration and gas dispersion for chemical reactions are common uses of gas motive systems. Liquids are typically additives to be mixed with or to dilute the tank contents
Construction:
- One-piece body construction
- Unique venturi design
- The model is casted by metal molds
- Standard plastic material is GFRP, PVDF plastic
- Thread size is available in 1/4", 3/8", 1/2", 3/4" either BSPT or NPT
Typical Application:
- Sludge tanks
- Paint booths
- Plating tanks
- Anodizing tanks
- Fertilizer tanks
- Decorative fountains
- Tank blending of oils
