FF Filterable Ceramic Mist Nozzle

Characteristics:

FF series nozzle is a fine mist nozzle made of 304 stainless steel, which consists of the body, cap, spray disc and filter plug. And it has a built-in guide flow vane and anti-drip device to avoid water dripping at low pressure. When the pressure is below 15 bar, the nozzle stops working, and starts spraying over 20 bar. The type FF-CE has a removable and cleanable ceramic orifice, and FF-SS for the stainless steel orifice.

Compared to the FD, FE and FG series, except different the thread size and hexagon body, the FF nozzle is available to choose the ceramic or stainless steel spray disc. Ceramic material has a higher finish than stainless steel, and the liquid has a stronger pass rate at the same pressure.

FF series nozzle, is widely used in greenhouse humidification and cooling. And we are available to order the components to replace the old ones, including ceramic spray disc, anti-drip valves, filter plug, guide flow vane, etc.

Construction:

• Two-piece hexagon body with a groove vane
• Built-in an anti-drip valve and replaceable filter
• Standard material is 304 stainless steel
• FF Nozzles are available in either BSPT or NPT taper pipe thread
• Optional ceramic spray orifice from 0.1mm, 0.15mm, 0.2mm, 0.25mm up to 0.5mm

Typical Application:

• Humidification in the electronics industry
• Greenhouse cooling and humidity control
• Humidity maintenance in storage workshops
• Paper mill, cigarette mill humidity control
• Textile mill humidity control and eliminate static electricity