Micro Mist Tips
FA Mist Tip
Model FA is a low pressure mist tip, the body is made of brass or stainless steel. This mist tip is available in combination with various spray clusters. This mist tip is widely used in mosquito control and outdoor humidification.
- Model:
- FA series
- Construction:
- One-piece body without the anti-drip valve
- Material:
- nickel plated brass or stainless steel
- Connection:
- 10-24, 12-24, W3/16 or M5
- Pressure:
- 3-15 bar
- Orifice:
- 0.2mm, 0.3mm up to 1.0mm
- Spray angle:
- 42° to 90° at 10 bar
- Flow Rate:
- (0.3mm) 2.5 lph at 10 bar
FA Barb Mist Tip
Model FA is a low pressure mist tip, the body is made of brass or stainless steel. The connection type is available in thread or barb style. This barb stem can be inserted into a 6mm or 1/4" plastic tubing.
- Model:
- FA series
- Construction:
- One-piece body without the anti-drip valve
- Material:
- nickel plated brass or stainless steel
- Connection:
- 6mm or 1/4 inch barb
- Pressure:
- 3-15 bar
- Orifice:
- 0.2mm, 0.3mm up to 1.0mm
- Spray angle:
- 42° to 90° at 10 bar
- Flow rate:
- (0.3mm) 2.5 lph at 10 bar
FB Push-in Mist Tip
Model FB is a low pressure mist tip, the body is made of brass or stainless steel. The connection body is available in push-in stem style. It is very easy to push into a quick couplings. This nozzle can be fitted with a filter plug at the inlet.
- Model:
- FB series
- Construction:
- Two-piece body with an anti-drip valve
- Material:
- nickel plated brass or stainless steel
- Connection:
- 6mm or 1/4 inch push-in stem
- Pressure:
- 7 to 15 bar
- Spray angle:
- 42° to 90° at 10 bar
- Orifice:
- 0.2mm, 0.3mm up to 1.0mm
- Flow rate:
- (0.3mm orifice) 4.65 lph at 10 bar