FA Mist Tip
- Number:
- 159
- Brand:
- RELAB
- Model:
- FA series
- Construction:
- One-piece body without the anti-drip valve
- Material:
- nickel plated brass or stainless steel
- Connection:
- 10-24, 12-24, W3/16 or M5
- Pressure:
- 3-15 bar
- Orifice:
- 0.2mm, 0.3mm up to 1.0mm
- Spray angle:
- 42° to 90° at 10 bar
- Flow Rate:
- (0.3mm) 2.5 lph at 10 bar
Send a message to us!
Design Features
Characteristics:
FA series is a low pressure micro mist nozzle. The FA mist nozzle does not require air assistance, and it sprays fine droplets through the pressurized water. The spray angle is from 42 to 90 degrees based on different pressure, and the diameter of the atomized particles is 30 to 80um.
The nozzle doesn't contain any anti-drip device, the water is required to be purified by 20~50 micron filter or mesh screen. The minimum orifice diameter is 0.2mm. The higher the pressure, the better mist effect. Due to the fact that there is a inserted spray disc, a working pressure of less than 20 kg is recommended.
Construction:
- One-piece body construction without anti-drip valve
- Unique slotted vane design produces fine mist
- The models listed are machined from bar stock
- Standard materials are nickel plated brass, 304 stainless steel
- All models are available in thread sizes of W3/16,10-24unc-2A,12-24unc-2A or M5
Typical Application:
- Leisure cooling
- Odor elimination
- Cooling in golf-course
- Outdoor mosquito control
- Humidification in mushroom room
- Livestock farm disinfection and cooling
Technical Data
You can contact us to get a catalog soon.