FC Anti-drip Plastic Micro Mist Nozzle

Characteristics:

FC series is a low pressure plastic micro mist nozzle. The nozzle is made entirely of plastic, except for a built-in metal filter mesh. The FC plastic mist nozzle is a hydraulic atomization type, which does not require air assistance. At a pressure of 4~15 bar, it produces a spray angle of 65~90 degrees and a particle size of 30~80 microns.

Although the nozzle contains an anti-drip device and a metal mesh, the water is required to be purified by 20~50 micron filter. The minimum orifice diameter is 0.3mm. It is the higher pressure, the better effect. Since the nozzle material is plastic, too much pressure will wear the spray orifice, so a pressure of less than 15 bar is recommended.

Construction:

• One-piece body construction with an anti-drip valve
• Unique vane design produces micro mist
• The model is injected by metal molds
• Standard material is PP (Polypropylene) plastic
• Thread size is available in 1/8" male either BSPT or NPT

Typical Application:

• Leisure cooling
• Cooling in golf-course
• Outdoor mosquito control
• Humidification in mushroom room
• Livestock farm disinfection and cooling