SS-orifice Fine Mist Nozzles

SS-orifice Fine Mist Nozzles

FD Stainless Steel Fine Mist Nozzle

FD Stainless Steel Fine Mist Nozzle Model FD is a common high pressure mist nozzle. Its open pressure is 20 bar due to an internal anti-drip valve. This model is without any filter or strainer/screen, so the mini. orifice diameter is 0.2mm only.

Model:
FD series
Construction:
Two-piece round body without filter plug
Material:
nickel plated brass or 304SS
Thread:
W3/16, 10/24, 12/24 or M5
Pressure:
30 to 80 bar
Spray angle:
30° to 90° at 60 bar
Orifice:
0.2mm, 0.25mm, 0.3mm up to 0.8mm
Filterable:
No

FE Filterable Fine Mist Nozzle

FE Filterable Fine Mist Nozzle Model FE is a lengthened high pressure mist nozzle. Besides of the anti-drip valve, it still has a filter base. Its mini. orifice diameter is 0.1mm. The 316 stainless steel is available on request.

Model:
FE series
Construction:
Three-piece body with filter base
Material:
nickel plated brass or 304 stainless steel
Thread:
10/24, 12/24, W3/16 or M5
Pressure:
30 to 70 bar
Spray angle:
30° to 90°at 60 bar
Flow rate:
0.1mm, 0.15mm, 0.2mm up to 0.5mm

FF Filterable Fine Mist Nozzle

FF Filterable Fine Mist Nozzle Model FF is made of 304 stainless steel, which consists of the body, cap, spray disc, anti-drip valve and filter plug. It has a hexagon body with 1/8" male taper pipe threads. All parts are removable, cleanable and replacement.

Model:
FF series
Construction:
Two-piece hexagon body with a filter plug
Material:
304 stainless steel
Thread:
1/8 male BSPT/NPT
Pressure:
30 to 80 bar
Spray angle:
30° to 85° at 60 bar
Flow rate:
0.1mm, 0.15mm, 0.2mm up to 0.5mm

FJ SS Impact Pin Mist Nozzle

FJ SS Impact Pin Mist Nozzle Model FJ produces extremely fine fog masses, which is especially suitable for spray humidification and making artificial landscapes outdoor. The full stainless steel body is available in various orifice diameter.

Model:
FJ series
Construction:
One-piece body with a filter plug
Material:
304 stainless steel or 316 stainless steel
Thread:
1/8 or 1/4 male BSPT/NPT
Pressure:
20 to 70 bar
Spray angle:
80° to 120° at 60 bar
Orifice:
0.2mm, 0.3mm up to 1.0mm