FJ SS Impact Pin Mist Nozzle

Characteristics:

The FJ series is an impingement nozzle. The fluid is ejected from the nozzle orifice and impacts upon a pin in the direct path of the water flow. The pin has the same diameter as the orifice at the end of the nozzle. When the fluid stream strikes the pin, it is broken up into very fine particles, producing a fog under 50 micron.

There is not whirl vanes or internal parts in the nozzle, except for a filter plug. The impact pin mist nozzles can be made from 304 or 316 stainless steel. They are usually designed with a 80°~120° spray angle, and produce a cone-shaped fog.

The nozzle produces extremely fine fog masses, which is especially suitable for spray humidification and making artificial landscapes outdoor. The 0.15mm orifice is for ruby insert, and has a long lifetime due to the ruby's high abrasion resistance.

The impact pin mist nozzle is usually installed outdoors. To avoid damaging the pins in front of the nozzle, it is recommended to install a protective cover and an extension rod.

Construction:

• One-piece body construction with a filter plug
• Unique pin design produces con-shaped fine fog
• The models listed are machined from bar stock
• Standard materials are 304 stainless steel or 316 stainless steel
• The connection size is available in either 1/8" or 1/4" male BSPT/NPT

Typical Application:

• Mosquito control
• Odor elimination
• Artificial fog landscape
• Cooling in the amusement park
• Spray humidification in zoo
• Livestock farm disinfection and cooling