G Series: Oil Burner Nozzles
There are two fuel nozzles to choose from: pressure atomizing and pneumatic atomizing. These nozzles are typically used for the combustion of waste oil and other recycled oil. Their spray media is not limited to oil, but can also be used for the water and other liquids.
GA Siphon Oil Buner Nozzle
Model GA is a pneumatic atomizing nozzle. It can be used to atomize water, oil and other solutions with the aid of air. So it requires a special adapter to connect the liquid and compressed air. The liquid is automatically inhaled based on the siphon.
- Model:
- GA series
- Construction:
- Two-piece body with a removable spray disc
- Body Material:
- Brass
- Body thread:
- 9/16-24UNEF
- Air pressure:
- 0.21 to 2.8 bar
- Liquid supply:
- Siphon or gravity
- Spray angle:
- 20° to 95°
- Flow rate:
- 0.17 to 1.1 lph at 4 psi air
GD Brass Snowmaking Nozzle
Model G series is a finer hollow cone nozzle, while GD is a hydraulic spray type, It is available in a variety of orifice diameters. GD nozzle is an ideal part for the oil burner, fog cannon and snowmaking.
- Model:
- GD series
- Construction:
- One-piece hexagon body with a sintered filter
- Material:
- Brass or stainless steel
- Thread:
- 9/16-24UNEF
- Pressure:
- 7 to 35 bar
- Orifice:
- 0.1 to 0.8mm
- Spray angle:
- 30° to 90°
- Flow rate:
- 0.3 to 8.0 lph at 100 psi
GF Oil Burner Nozzle
Model G series is a finer mist nozzle, while GF is a pressure atomization type, It is available in a variety of orifice diameters. GF nozzle is an ideal part for the oil burner, fog cannon and air conditioning system.
- Model:
- GF series
- Construction:
- One-piece hexagon body with a strainer
- Material:
- 304SS or 316SS
- Thread:
- 9/16-24UNEF or 1/4 male
- Pressure:
- 7 to 45 bar
- Orifice:
- 0.1 to 0.8mm
- Spray angle:
- 30° to 90°
- Flow rate:
- 0.3 to 8.0 lph at 100 psi