B Series: Full Cone Nozzles
According to the spray angle size, the B series full cone nozzles are divided into standard angle, narrow angle and wide angle. Their range is from 15° to 140°@1.5 bar. Full cone nozzles are used in cooling towers, foam dispersion, coal washing, spray coating, gas scrubbing, chemical processing and fire protection.
BA Cutty Full Cone Nozzle
Model BA is a short head design with a parallel pipe thread. It is more suitable for tight headroom. Multi-grooved vane design produces a uniform spray effect and standard spray angle.
- Model:
- BA series
- Construction:
- two-piece, with a spiral groove vane
- Material:
- Brass, Stainless steel
- Thread:
- 1/8 to 3/8 male BSPP/NPS
- Pressure:
- 0.7 to 10 bar
- Spray angle:
- 58° to 90° at 1.5 bar
- Flow rate:
- 0.6 to 13.6 LPM at 2 bar
BB Full Cone Nozzle
Model BB is the most commonly used full cone nozzle. It has a built-in X-style vane, which can better reduce clogging. If you want fast delivery, BB nozzle is the best choice.
- Model:
- BB series
- Construction:
- Two-piece, with an X-style vane
- Material:
- Brass, stainless steel
- Thread:
- 1/8 to 3/8 male BSPT/NPT
- Pressure:
- 0.7 to 10 bar
- Spray angle:
- 58° to 90° at 1.5 bar
- Flow rate:
- 0.6 to 13.6 LPM at 2 bar
BC Full Cone Nozzle
Model BC is a flat square design. It is different appearance from model BB, and both models have the same internal structure and spray features. But its smallest thread size is required at 3/8" .
- Model:
- BC series
- Construction:
- One-piece body with an X-style vane
- Material:
- Brass, Stainless steel
- Connection:
- 3/8 to 1 inch male thread
- Pressure:
- 0.5 to 10 bar
- Spray angle:
- 50° to 94° at 1.5 bar
- Flow rate:
- 5.1 to 76.5 LPM at 1.5 bar
BE Full Cone Nozzle
Model BE is a combined full cone nozzle, which consists of a removable cap and a connection body. It is available in a variety of flow rate and thread size options. Their advantages are revealed in environments based on small flow and large thread.
- Model:
- BE series
- Construction:
- Two-piece with an X-style vane
- Material:
- Brass, Stainless steel
- Thread:
- 1/8 to 1/2 male BSPT/NPT
- Pressure:
- 0.5 to 10 bar
- Spray angle:
- 50° to 94° at 2 bar
- Flow rate:
- 0.6 to 31 LPM at 2 bar
BK Square Full Cone Nozzle
The model BK produces a square spray area. Please note that the position of square spray pattern, as it contacts the sprayed surface, will rotate as the pressure increases. This is more pronounced with larger size nozzles and at lower pressures.
- Model:
- BK series
- Construction:
- One-piece body with an X-style vane
- Material:
- Brass, Stainless steel
- Thread:
- 1/8 to 2-1/2 male BSPT/NPT
- Pressure:
- 0.5 to 10 bar
- Spray angle:
- 52° to 84° at 2 bar
- Flow rate:
- 2.2 to 585 LPM at 2 bar
BA-W Wide Full Cone Nozzle
Model BA-W is a short head design with a parallel pipe thread. It is more suitable for tight headroom as same as model BA. Multi-grooved vane design produces a uniform spray effect and standard spray angle.
- Model:
- BA-W series
- Construction:
- One-piece with a spiral groove vane
- Material:
- brass or stainless steel
- Thread:
- 1/8 to 3/8 male BSPP/NPS
- Pressure:
- 0.7 t o 10 bar
- Spray angle:
- 120° at 1.5 bar
- Flow rate:
- 0.9 to 16 LPM at 2 bar
BB-W Wide-angle Full Cone Nozzle
Model BB-W is a common wide-spray full cone nozzle. It has a built-in X-style vane, which can better reduce clogging. If you want a wide angle and small flow full cone nozzle, the BB-W style is the best choice.
- Model:
- BD series
- Construction:
- One-piece hex body with an X-style vane
- Material:
- Brass, Stainless steel
- Thread:
- 1/8 to 1/2 male BSPT/NPT
- Pressure:
- 0.5 to 10 bar
- Spray angle:
- 120° at 1.5 bar
- Flow rate:
- 0.8 to 27 LPM at 1.5 bar
BC-W Wide-angle Full Cone Nozzle
Model BC-W body is a flat square design. It is different appearance from model BC, and both models have the same internal structure and spray features, only the BC-W has much bigger spray angle.
- Model:
- BC-W series
- Construction:
- One-piece round body with an X-style vane
- Material:
- Brass, Stainless steel
- Thread:
- 3/8 to 1-1/2 male BSPT/NPT
- Pressure:
- 0.5 to 10 bar
- Spray angle:
- 120° at 1.5 bar
- Flow rate:
- 9.3 to 150 LPM at 1.5 bar
BK-W Wide-angle Square Nozzle
Model BK-W produces a wide angle square spray pattern. Please note that the position of square spray pattern, as it contacts the sprayed surface, will rotate as the pressure increases. This is more pronounced with larger size nozzles and at lower pressure
- Model:
- BK-W series
- Construction:
- One-piece body with an X-style vane
- Material:
- Brass, Stainless steel
- Thread:
- 1/4 to 1 inch male BSPT/NPT
- Pressure:
- 0.5 to 10 bar
- Spray angle:
- 120° at 1.5 bar
- Flow rate:
- 8.5 to 78 LPM at 2 bar
BG Narrow-angle Full Cone Nozzle
Model BG is a combined full cone nozzle, which delivers a narrow angle full cone spray pattern. The spray angle are 15° or 30° at 3 bar pressure. It is more convenient to choose a smaller flow rate with a larger thread size.
- Model:
- BG series
- Construction:
- Two-piece body with slotted vane
- Material:
- Brass, 303 stainless, 316 stainless steel
- Thread:
- 1/8, 1/4, 3/8 and 1/2 male BSPT/NPT
- Pressure:
- 1 to 20 bar
- Spray angle:
- 15°/30°
- Flow rate:
- 2.8 to 36 LPM at 3 bar
BH Narrow-angle Full Cone Nozzle
Model BH is a combined full cone nozzle, they are the same features as the model BG except the thread type. The spray angles are optional in 15° or 30° at 3 bar pressure. It is more convenient to choose a smaller flow rate with a larger thread size.
- Model:
- BH series
- Construction:
- Two-piece hex body with slotted vane
- Material:
- Brass, 303 stainless, 316 stainless steel
- Thread:
- 1/8, 1/4, 3/8 and 1/2 female BSPP/NPS
- Pressure:
- 1 to 20 bar
- Spray angle:
- 15°/30°
- Flow rate:
- 2.8 to 36 LPM at 3 bar
BL Max. Passage Full Cone Nozzle
Model BL has an ultimate clog-resistant design with largest free passage available in full cone nozzles. Unique S-style vane design enables the nozzle to successfully handle dirty and lumpy liquids, even large particles without clogging.
- Model:
- BL series
- Construction:
- One-piece round body with an S-style vane
- Material:
- Plastic, 316 stainless steel
- Thread:
- 3/8 to 4 inch male BSPT/NPT
- Pressure:
- 0.5 to 7 bar
- Spray angle:
- 60°, 90° and 120°
- Flow rate: