Automotive Industry

Sheet Metal Degreasing

Automobile sheet metal processing is also a technical means of automobile research and development. The use of lubricants and oils is sometimes necessary when processing automotive sheet metal parts. For example, cooling lubricants are used before turning, milling, or forming oils. Since the residues of the grease and oils have a disturbing effect in further processing steps, degreasing is necessary in preparatory surface treatment.

Automotive Raining Test

The automobile raining test is mainly used to check whether the product shell and seal is able to guarantee the good working performance and technical state of the equipment and components after water test or in the test, in particular, test the watertightness of vehicle side windows and sunroofs. At the same time, Inspection products may be affected by immersion during transportation and use, and provide reference for product technical standards.

Car Body Drying

In today's coating production field, one of the highest-cost areas continues to be the drying of parts after the pretreatment, post-wash and prepaint cycles. One way to reduce drying costs is by implementing effective blow-off drying.

Workpiece and Equipment Cooling

In the process of automobile sheet metal processing, high temperature will be generated due to the long-term work of equipment or stamping dies, and if the temperature is too high, it will affect the accuracy of processed products. Therefore, the cooling link is very important in the production process. It is conducive to improving work efficiency , and avoid shutdown due to excessive temperature.

Solutions Agitating

The agitation device is an important part of the automotive electrophoretic coating equipment. Most of them use a circulating pump with a mixing jet nozzle to evenly turn the tank content to prevent deposition, and improve fluid uniformity and pH.